THE KEO STANDARD - The Keo standard was developed with the goal of minimizing the weight and volume of the cleat/pedal unit, while remaining compatible with all the shoes on the market. The operational kinematic is identical to the Delta standard; pedal engagement and disengagement remain safe and very efficient.
LARGE SUPPORT SURFACE - The support surface of the Keo Easy assures stability of the foot on the pedal and good power transmission.
WEIGHT - Excellent price to weight ratio for this pedal quality due to the composite pedal body.
1 BEARING + 1 NEEDLE BEARING / STEEL AXLE - The axle system is composed of a cartridge ball bearings (12 mm interior x 18 mm exterior) that support the axle loads and a needle bearing that supports the radial loads. Look pedal axles are shock and fatigue tested to assure quality and reliability. Axles are approved after a rotational test of a million eccentric (which creates the shock each revolution) cycles at 100 rpm loaded with 90kg loaded on the center of the axle. This is well above the required EN14781 test of 100,000 cycles at 65kg centered on the axle.
RELEASE TENSION: 8 | The cleat retention is easy to release and comfortable, ideal for beginning cyclists.
USE - Road - Leisure
BODY - Composite
AXLE - Chromoly
THREAD - 9/16 X 20mm
ROLLER BEARING - 1 ball bearing, 1 Needle bearing
AXLE / SOLE HEIGHT - 17.5mm
AXLE DISTANCE PEDAL / CRANK - 53mm
MULTITENSOR - No - 8
CLEATS - Grey Keo Grip Cleats
ANGULAR FREEDOM - 0, 4.5, or 9 depending on the type of cleat (Black, Grey or Red)
PEDAL WEIGHT - 129g per pedal (326g per pair with cleats and hardware)
ACCESSORIES - One pair grey Keo Grip Cleats + Hardware (6 Bolts 5 X 11mm and 6 Washers)